View N141C3-L07_4593025.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 1 / 28 version 2.0 tft lcd approval specification model no.: n141c3 - l07 o?y u@ ?f?? |a ?2? 2008-08-26 10:11:58 cst pmmd iii director annie_hsu( ?}z ?q /56522 / 54873) director accept customer: a pproved by: note: www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 2 / 28 version 2.0 - contents - revision history ------------------------------------------------------- 3 1. general description ------------------------------------------------------- 4 1.1 overview 1.2 features 1.3 application 1.4 general specifications 1.5 mechanical specifications 2. absolute maximum ratings ------------------------------------------------------- 5 2.1 absolute ratings of environment 2.2 electrical absolute ratings 2.2.1 tft lcd module 2.2.2 backlight unit 3. electrical characteristics ------------------------------------------------------- 7 3.1 tft lcd module 3.2 backlight unit 4. block diagram ------------------------------------------------------- 11 4.1 tft lcd module 4.2 backlight unit 5. input terminal pin assignment ------------------------------------------------------- 12 5.1 tft lcd module 5.2 backlight unit 5.3 timing diagram of lvds input signal 5.4 color data input assignment 5.5 edid data structure 6. interface timing ------------------------------------------------------- 18 6 .1 input signal ti ming specifications 6.2 power on/off sequence 7. optical characteristics ------------------------------------------------------- 20 7.1 test conditions 7.2 optical specifications 8. precautions ------------------------------------------------------- 23 8.1 handling precautions 8.2 storage precautions 8.3 operation precautions 9. packing ------------------------------------------------------- 24 9.1 carton 9.2 pallet 10. definition of labels ------------------------------------------------------- 26 10.1 cmo module label 10.2 cmo carton labe www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 3 / 28 version 2.0 revision history version date page (new) section description 2.0 jul.15,?08 all all approval specification was first issued. www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 4 / 28 version 2.0 1 general description 1.1 overview n141c3 - l07 is a 14.1? tft liquid crystal display module with single ccfl backlight unit and 30 pins lvds interface. this module supports 1440 x (3 rgb) x 900 wxga+ mode and can display 262,144 colors. the optimum viewing angle is at 6 o?clock direction. the inverter module for backlight is not built in. 1.2 features - thin and light weight - wxga+ (1440 x 900 pixels) resolution - de only mode - 3.3v lvds (low voltage differential signaling) interface with 2 pixel/clock - rohs compliance 1.3 application - tft lcd notebook 1.4 general specificati0ns item specification unit note active area 303.48(h) x 189.675(v) (14.1 inch diagonal) mm bezel opening area 306.76 (h) x 193.0 (v) mm (1) driver element a-si tft active matrix - - pixel number 1440 x r.g.b. x 900 pixel - pixel pitch 0.21075 (h) x 0.21075 (v) mm - pixel arrangement rgb vertical stripe - - display colors 262,144 color - transmissive mode normally white - - surface treatment anti-glare and hard coat (3h min.) - - 1.5 mechanical specifications item min. typ. max. unit note horizontal(h) 319 319.5 320 mm vertical(v) 205 205.5 206 mm module size depth(d) -- 5.2 5.5 mm (1) weight -- 400 415 g note (1) please refer to the attached drawings for mo re information of front and back outline dimensions www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 5 / 28 version 2.0 2 absolute maximum ratings 2.1 absolute ratings of environment value item symbol min. max. unit note storage temperature t st -20 +60 oc (1) operating ambient temperature t op 0 +50 oc (1), (2) shock (non-operating) s nop - 220/2 g/ms (3), (5) vibration (non-operating) v nop - 1.5 g (4), (5) note (1) (a) 90 %rh max. (ta ?? 40 oc). (b) wet-bulb temperature should be 39 oc max. (ta > 40 oc). (c) no condensation. note (2) the temperature of panel display surface area should be 0 oc min. and 60 oc max.. note (3) 1 time for x, y, z. for condition (220g / 2ms) is half sine wave,. note (4) 10 ~ 500 hz, 30 min / cycle, 1 cycles for each x, y, z axis. note (5) at testing vibration and shock, the fixt ure in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. the fixing condition is shown as below: side mount fixing screw side mount fixing screw stage bracket lcd module gap=2mm a t room tem p erature storage range relative humidity (%rh) operating range temperature (oc) 100 80 60 -20 40 0 20 -40 80 40 60 20 10 90 www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 6 / 28 version 2.0 2.2 electrical absolute ratings 2.2.1 tft lcd module value item symbol min. max. unit note power supply voltage v cc -0.3 +4.0 v logic input voltage v in -0.3 v cc +0.3 v (1) 2.2.2 backlight unit value item symbol min. max. unit note lamp voltage v l - 2.5k v rms (1), (2) lamp current i l 2.0 6.5 ma rms lamp frequency f l 45 80 khz (1), (2) note (1) permanent damage to the device may occur if maximum values are exceeded. function operation should be restricted to the conditions desc ribed under normal operating conditions. note (2) specified values are for lamp (refer to 3.2 for further information). www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 7 / 28 version 2.0 3 electrical characteristics 3.1 tft lcd module ta = 25 2 oc value parameter symbol min. typ. max. unit note power supply voltage vcc 3.0 3.3 3.6 v - permissive ripple voltage v rp - 50 - mv - rush current i rush - - 1.5 a (2) initial stage current i is - - 1.0 a (2) white - 360 400 ma (3)a power supply current black icc - 450 490 ma (3)b lvds differential input high threshold v th(lvds) - - +100 mv (5), v cm =1.2v lvds differential input low threshold v tl(lvds) -100 - - mv (5) v cm =1.2v lvds common mode voltage v cm 1.125 - 1.375 v (5) lvds differential input voltage |v id | 100 - 600 mv (5) terminating resistor r t - 100 - ohm - power per ebl wg p ebl - 3.54 - w (4) note (1) the ambient temperature is ta = 25 2 oc. note (2) i rush : the maximum current when vcc is rising i is : the maximum current of the first 100ms after power-on measurement conditions: shown as the following figure. test pattern: black. r1 (high to low) (control signal) +12v sw q2 c1 1uf vcc +3.3v 2sk1470 q1 2sk1475 47k r2 1k vr1 47k c2 0.01uf c3 1uf fuse (lcd module input) vcc rising time is 470us 470us +3.3v 0v 0.1vcc vcc i is icc i rush 100ms www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 8 / 28 version 2.0 note (3) the specified power supply current is under the conditions at vcc = 3.3 v, ta = 25 2 oc, f v = 60 hz, whereas a power dissipation check pattern below is displayed. note (4) the specified power are the sum of lcd p anel electronics input power and the inverter input power. test conditions are as follows. (a) vcc = 3.3 v, ta = 25 2 oc, f v = 60 hz, (b) the pattern used is a black and white 32 x 36 checkerboard, slide #10 0 from the vesa file ?flat panel display monitor setup patterns?, fpdmsu.ppt. (c) luminance: 60 nits. (d) the inverter used is provided from sumida please contact them for detail information. cmo doesn?t provide the inverter in this product. note (5) the parameters of lvds signals are defined as the following figures. active area a. white pattern active area b. black pattern 0v v cm | v id | single ended 0v | v id | v th ( lvds ) v tl ( lvds ) differential www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 9 / 28 version 2.0 3.2 backlight unit ta = 25 2 oc value parameter symbol min. typ. max. unit note lamp input voltage v l 612 680 748 v rms i l = 6.0 ma lamp current i l 2.0 6.0 6.5 ma rms (1) - - 1370 (25 o c) v rms (2) lamp turn on voltage v s - - 1520 (0 o c) v rms (2) operating frequency f l 45 - 80 khz (3) lamp life time l bl 15,000 - - hrs (5) power consumption p l - 4.08 - w (4), i l = 6.0 ma note (1) lamp current is measur ed by utilizing a high frequency current meter as shown below: note (2) the voltage that must be larger than vs should be applied to the lamp for more than 1 second after startup. otherwise the lamp may not be turned on. note (3) the lamp frequency may produce interferen ce with horizontal synchronous frequency from the display, and this may cause line flow on the display. in order to avoid interference, the lamp frequency should be detached from the horizontal sy nchronous frequency and its harmonics as far as possible. note (4) p l = i l v l note (5) the lifetime of lamp can be defined as the time in which it continues to operate under the condition ta = 25 2 o c and i l = 6 marms until one of the following events occurs: (a) when the brightness becomes or lower than 50% of its original value. (b) when the effective ignition length becomes or lower than 80% of its original value. (the effective ignition length is a scope that lumina nce is over 70% of that at the center point.) note (6) the waveform of the voltage output of inverter must be area-symmetric and the design of the inverter must have specifications for the modularized lamp. the performance of the backlight, such as lifetime or brightness, is greatly influenced by the characteristics of the dc-ac inverter for the lamp. all the parameters of an inverter s hould be carefully designed to avoid producing too much current leakage from high voltage output of the inverter. when designing or ordering the inverter please make sure that a poor lighting ca used by the mismatch of the backlight and the inverter (miss-lighting, flicker, etc.) never occu rs. if the above situation is confirmed, the module should be operated in the same manners when it is installed in your instrument. the output of the inverter must have symmetrical (negative and positive) voltage waveform and symmetrical current waveform.(unsy mmetrical ratio is less than 10%) please do not use the inverter which has unsymmetrical voltage and unsymmetrical current and spike wave. lamp frequency may lcd module 1 inverter a current meter hv (pink) lv (white) 2 www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 10 / 28 version 2.0 produce interface with horizontal synchronous frequency and as a result this may cause beat on the display. therefore lamp frequency shall be as away possible from the horizontal synchronous frequency and from its harmonics in order to prevent interference. requirements for a system inverter design, which is intended to have a better display performance, a better power efficiency and a more reliable lamp. it shall help increase the lamp lifetime and reduce its leakage current. a. the asymmetry rate of the inverter waveform should be 10% below. b. the distortion rate of the waveform should be within 2 10%. c. the ideal sine wave form shall be symmetric in positive and negative polarities. i p i -p * asymmetry rate: | i p ? i ?p | / i rms * 100% * distortion rate i p (or i ?p ) / i rms www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 11 / 28 version 2.0 4 block diagram 4.1 tft lcd module 4.2 backlight unit 1 hv (pink) 2 lv ( white ) v edid data edid vcc gnd v l lvds display data & clock tft lcd panel data driver ic scan driver ic backlight unit lvds input / timing controller dc/dc converter & reference voltage generator input connector lamp connector edid eeprom clk edid www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 12 / 28 version 2.0 5 input terminal pin assignment 5.1 tft lcd module pin symbol description polarity remark 1 vss ground 2 vcc power supply +3.3 v (typical) 3 vcc power supply +3.3 v (typical) 4 v edid ddc 3.3v power 5 nc non-connection 6 clk edid ddc clock 7 data edid ddc data - 8 rxo0- lvds differential data input (odd) negative 9 rxo0+ lvds differential data input (odd) positive 10 vss ground 11 rxo1- lvds differential data input (odd) negative 12 rxo1+ lvds differential data input (odd) positive 13 vss ground 14 rxo2- lvds differential data input (odd) negative 15 rxo2+ lvds differential data input (odd) positive 16 vss ground 17 rxoc- lvds clock data input (odd) negative 18 rxoc+ lvds clock data input (odd) positive 19 vss ground 20 rxe0- lvds differential data input (even) negative 21 rxe0+ lvds differential data input (even) positive 22 vss ground 23 rxe1- lvds differential data input (even) negative 24 rxe1+ lvds differential data input (even) positive 25 vss ground 26 rxe2- lvds differential data input (even) negative 27 rxe2+ lvds differential data input (even) positive 28 vss ground 29 rxec- lvds clock data input (even) negative 30 rxec+ lvds clock data input (even) positive note (1) connector part no.: jae-fi-xb30srl-hf11 or equivalent note (2) user?s connector part no: jae-fi-x30c2l or equivalent note (3) the first pixel is odd as shown in the following figure. www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 13 / 28 version 2.0 5.2 backlight unit pin symbol description color 1 hv high voltage pink 2 lv ground white note (1) connector part no.: jst- bhsr-02vs-1 or equivalent note (2) user?s connector part no.: sm02b-bhss-1-tb or equivalent 5.3 timing diagram of lvds input signal in6 in5 in4 in3 in2 in1 in0 in13 in12 in11 in10 in9 in8 in7 in20 in19 in18 in17 in16 in15 in14 eg0 er3 er2 er1 er0 er5 er4 eb1 eg4 eg3 eg2 eg1 eb0 eg5 de eb5 eb4 eb3 eb2 vsync hsync t/7 signal for 1 dclk cycle (t) rxec+ rxe2+/- rxe1+/- rxe0+/- in6 in5 in4 in3 in2 in1 in0 in13 in12 in11 in10 in9 in8 in7 in20 in19 in18 in17 in16 in15 in14 og0 or3 or2 or1 or0 or5 or4 ob1 og4 og3 og2 og1 ob0 og5 de ob5 ob4 ob3 ob2 vsync hsync t/7 signal for 1 dclk cycle (t) rxo0+/- rxo1+/- rxo2+/- rxoc+ www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 14 / 28 version 2.0 5.4 color data input assignment the brightness of each primary color (red, green an d blue) is based on the 6-bit gray scale data input for the color. the higher the binary input, the brighter t he color. the table below provides the assignment of color versus data input. data signal red green blue color r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 basic colors black red green blue cyan magenta yellow white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 gray scale of red red(0)/dark red(1) red(2) : : red(61) red(62) red(63) 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of green green(0)/dark green(1) green(2) : : green(61) green(62) green(63) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of blue blue(0)/dark blue(1) blue(2) : : blue(61) blue(62) blue(63) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 note (1) 0: low level voltage, 1: high level voltage www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 15 / 28 version 2.0 5.5 edid data structure the edid (extended display identification data) data formats are to support displays as defined in the vesa plug & display and fpdi standards. byte # (decimal ) byte (hex) field name and comments value (hex) value (binary) 0 0 header 00 00000000 1 1 header ff 11111111 2 2 header ff 11111111 3 3 header ff 11111111 4 4 header ff 11111111 5 5 header ff 11111111 6 6 header ff 11111111 7 7 header 00 00000000 8 8 eisa id manufacturer name (?cmo?) 0d 00001101 9 9 eisa id manufacturer name (compressed ascii) af 10101111 10 0a id product code (N141C3-L07) 39 00111001 11 0b id product code (hex lsb first; N141C3-L07) 14 00010100 12 0c id s/n (fixed ?0?) 00 00000000 13 0d id s/n (fixed ?0?) 00 00000000 14 0e id s/n (fixed ?0?) 00 00000000 15 0f id s/n (fixed ?0?) 00 00000000 16 10 week of manufacture (fixed week code) 0b 00001011 17 11 year of manufacture (fixed year code) 12 00010010 18 12 edid structure version # (?1?) 01 00000001 19 13 edid revision # (?3?) 03 00000011 20 14 video i/p definition (?digital?) 80 10000000 21 15 active area horizontal 30.348cm 1e 00011110 22 16 active area vertical 18.9675cm 13 00010011 23 17 display gamma (gamma = ?2.2?) 78 01111000 24 18 feature support (?active off, rgb color?) 0a 00001010 25 19 rx1 rx0 ry1 ry0 gx1 gx0 gy1 gy0 3f 00111111 26 1a bx1 bx0 by1 by 0 wx1 wx0 wy1 wy0 85 10000101 27 1b rx=0.590 97 10010111 28 1c ry=0.327 53 01010011 29 1d gx=0.296 4b 01001011 30 1e gy=0.557 93 10010011 31 1f bx=0.158 28 00101000 32 20 by=0.148 26 00100110 33 21 wx=0.313 50 01010000 34 22 wy=0.329 54 01010100 35 23 established timings 1 00 00000000 36 24 established timings 2 00 00000000 37 25 manufacturer?s reserved timings 00 00000000 38 26 standard timing id # 1 01 00000001 39 27 standard timing id # 1 01 00000001 40 28 standard timing id # 2 01 00000001 41 29 standard timing id # 2 01 00000001 42 2a standard timing id # 3 01 00000001 43 2b standard timing id # 3 01 00000001 www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 16 / 28 version 2.0 44 2c standard timing id # 4 01 00000001 45 2d standard timing id # 4 01 00000001 46 2e standard timing id # 5 01 00000001 47 2f standard timing id # 5 01 00000001 48 30 standard timing id # 6 01 00000001 49 31 standard timing id # 6 01 00000001 50 32 standard timing id # 7 01 00000001 51 33 standard timing id # 7 01 00000001 52 34 standard timing id # 8 01 00000001 53 35 standard timing id # 8 01 00000001 54 36 detailed timing description # 1 pixel clock (?107.8mhz?, according to vesa cvt rev1.1) 1c 00011100 55 37 # 1 pixel clock (hex lsb first) 2a 00101010 56 38 # 1 h active (?1440?) a0 10100000 57 39 # 1 h blank (?418?) a2 10100010 58 3a # 1 h active : h blank (?1440 : 418?) 51 01010001 59 3b # 1 v active (?900?) 84 10000100 60 3c # 1 v blank (?67?) 43 01000011 61 3d # 1 v active : v blank (?900 :67?) 30 00110000 62 3e # 1 h sync offset (?126?) 7e 01111110 63 3f # 1 h sync pulse width ("84?) 54 01010100 64 40 # 1 v sync offset : v sync pulse width (? 8 : 15?) 8f 10001111 65 41 # 1 h sync offset : h sync pulse width : v sync offset : v sync width (?126: 84 : 8 : 15?) 00 00000000 66 42 # 1 h image size (?303 mm?) 2f 00101111 67 43 # 1 v image size (?190 mm?) be 10111110 68 44 # 1 h image size : v image size (?303 : 190?) 10 00010000 69 45 # 1 h boarder (?0?) 00 00000000 70 46 # 1 v boarder (?0?) 00 00000000 71 47 # 1 non-interlaced, normal, no stereo, separate sync, h/v pol negatives 18 00011000 72 48 detailed timing description # 2 00 00000000 73 49 # 2 flag 00 00000000 74 4a # 2 reserved 00 00000000 75 4b # 2 fe (hex) defines ascii string (model name ?n141c3-l01?, ascii) fe 11111110 76 4c # 2 flag 00 00000000 77 4d # 2 1st character of name (?n?) 4e 01001110 78 4e # 2 2nd character of name (?1?) 31 00110001 79 4f # 2 3rd character of name (?4?) 34 00110100 80 50 # 2 4th character of name (?1?) 31 00110001 81 51 # 2 5th character of name (?c?) 43 01000011 82 52 # 2 6th character of name (?3?) 33 00110011 83 53 # 2 7th character of name (?-?) 2d 00101101 84 54 # 2 8th character of name (?l?) 4c 01001100 85 55 # 2 9th character of name (?0?) 30 00110000 86 56 # 2 9th character of name (?7?) 37 00110111 87 57 # 2 new line character indicates end of ascii string 0a 00001010 88 58 # 2 padding with ?blank? character 20 00100000 89 59 # 2 padding with ?blank? character 20 00100000 www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 17 / 28 version 2.0 90 5a detailed timing description # 3 00 00000000 91 5b # 3 flag 00 00000000 92 5c # 3 reserved 00 00000000 93 5d # 3 fe (hex) defines ascii string (vendor ?cmo?, ascii) fe 11111110 94 5e # 3 flag 00 00000000 95 5f # 3 1st character of string (?c?) 43 01000011 96 60 # 3 2nd character of string (?m?) 4d 01001101 97 61 # 3 3rd character of string (?o?) 4f 01001111 98 62 # 3 new line character indicates end of ascii string 0a 00001010 99 63 # 3 padding with ?blank? character 20 00100000 100 64 # 3 padding with ?blank? character 20 00100000 101 65 # 3 padding with ?blank? character 20 00100000 102 66 # 3 padding with ?blank? character 20 00100000 103 67 # 3 padding with ?blank? character 20 00100000 104 68 # 3 padding with ?blank? character 20 00100000 105 69 # 3 padding with ?blank? character 20 00100000 106 6a # 3 padding with ?blank? character 20 00100000 107 6b # 3 padding with ?blank? character 20 00100000 108 6c detailed timing description # 4 00 00000000 109 6d # 4 flag 00 00000000 110 6e # 4 reserved 00 00000000 111 6f # 4 fe (hex) defines ascii string (model name?N141C3-L07?, ascii) fe 11111110 112 70 # 4 flag 00 00000000 113 71 # 4 1st character of name (?n?) 4e 01001110 114 72 # 4 2nd character of name (?1?) 31 00110001 115 73 # 4 3rd character of name (?4?) 34 00110100 116 74 # 4 4th character of name (?1?) 31 00110001 117 75 # 4 5th character of name (?c?) 43 01000011 118 76 # 4 6th character of name (?3?) 33 00110011 119 77 # 4 7th character of name (?-?) 2d 00101101 120 78 # 4 8th character of name (?l?) 4c 01001100 121 79 # 4 9th character of name (?0?) 30 00110000 122 7a # 4 9th character of name (?7?) 37 00110111 123 7b # 4 new line character indicates end of ascii string 0a 00001010 124 7c # 4 padding with ?blank? character 20 00100000 125 7d # 4 padding with ?blank? character 20 00100000 126 7e extension flag 00 00000000 127 7f checksum ca 11001010 www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 18 / 28 version 2.0 6 interface timing 6.1 input signal timing specifications the specifications of input signal timing are as the following table and timing diagram . signal item symbol min. typ. max. unit note dclk frequency 1/tc 25 44.5 60 mhz (2) vertical total time tv 910 926 1500 th - vertical active display period tvd 900 900 900 th - vertical active blanking period tvb tv-tvd 26 tv-tvd th horizontal total time th 760 800 1000 tc (2) horizontal active display period thd 720 720 720 tc (2) de horizontal active blanking period thb th-thd 80 th-thd tc (2) note (1) because this module is operated by de only mode, hsync and vsync are ignored. (2) 2 channels lvds input. input signal timing diagram t h t c dclk t hd t vd t v de de data www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 19 / 28 version 2.0 6.2 power on/off sequence timing specifications: 0.5< t1 ?? 10 msec 0 < t2 ?? 50 msec 0 < t3 ?? 50 msec t4 ? 500 msec t5 ? 200 msec t6 ? 200 msec note (1) please follow the power on/off sequence de scribed above. otherwise, the lcd module might be damaged. note (2) please avoid floating state of interface signal at invalid period. when the interface signal is invalid, be sure to pull down the power supply of lcd vcc to 0 v. note (3) the backlight inverter power must be turned on after the power supply for the logic and the interface signal is valid. the backlight inverter power must be turned off before the power supply for the logic and the interface signal is invalid. note (4) sometimes some slight noise shows when lcd is turned off (even backlight is already off). to avoid this phenomenon, we suggest that the vcc falling time is better to follow 1ms t7 300 ms. ???? - power supply for lcd, vcc - lvds interface - power for lamp restart power on power off 50% 50% 0v 0v 10% t6 t5 t4 t3 t2 t1 90% 10% 90% valid data on off off 10% t7 www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 20 / 28 version 2.0 7 optical characteristics 7.1 test conditions item symbol value unit ambient temperature ta 25 2 o c ambient humidity ha 50 10 %rh supply voltage v cc 3.3 v input signal according to typical val ue in "3. electrical characteristics" inverter current i l 6.0 ma inverter driving frequency f l 61 khz inverter sumida h05-4915 the relative measurement methods of optical char acteristics are shown in 7.2. the following items should be measured under the test conditions descri bed in 7.1 and stable environment shown in note (6). 7.2 optical specifications item symbol condition min. typ. max. unit note contrast ratio cr 300 450 - - (2), (5) t r - 3 8 ms response time t f - 7 12 ms (3) average luminance of white l ave 170 200 - cd/m 2 (4), (5) white variation w 5pts - - 1.4 - (5) rx 0.590 - red ry 0.327 - gx 0.296 - green gy 0.557 - bx 0.158 - blue by 0.148 - wx 0.313 - color chromaticity white wy x =0 , y =0 viewing normal angle typ -0.03 0.329 typ +0.03 - x + 40 45 - horizontal x - 40 45 - y + 15 20 - viewing angle vertical y - cr 10 40 45 - deg. (1), (5) www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 21 / 28 version 2.0 note (1) definition of viewing angle ( x, y): note (2) definition of contrast ratio (cr): the contrast ratio can be calcul ated by the following expression. contrast ratio (cr) = l63 / l0 l63: luminance of gray level 63 l 0: luminance of gray level 0 cr = cr (5) cr (x) is corresponding to the contrast ratio of the point x at figure in note (6). note (3) definition of response time (t r , t f ): 12 o?clock direction y+ = 90o 6 o?clock y- = 90o x ? x + y- y + x- y+ y- x+ normal x = y = 0o x+ = 90o x- = 90o 100% 90% 10% 0% gray l evel 63 gray l evel 0 gray l evel 63 time t f optical response t r 66.67 ms 66 . 6 7 m s www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 22 / 28 version 2.0 note (4) definition of average luminance of white (l ave ): measure the luminance of gray level 63 at 5 points l ave = [l (1)+ l (2)+ l (3)+ l (4)+ l (5)] / 5 l (x) is corresponding to the luminance of the point x at figure in note (6) note (5) measurement setup: the lcd module should be stabilized at giv en temperature for 20 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after lighting backlight for 20 minutes in a windless room. note (6) definition of white variation ( w): measure the luminance of gray level 63 at 5 points w = maximum [l (1), l (2), l (3), l (4), l (5)] / minimum [l (1), l (2), l (3), l (4), l (5)] cs-1000t field of view = 2o 500 mm lcd module lcd panel center of the screen light shield room (ambient luminance < 2 lux) usb2000 d w active area vertical line horizontal line : test point x=1 to 5 5 12 3 4 d/4 d/2 3d/4 w/4 w/2 3w/4 x www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 23 / 28 version 2.0 8 precautions 8.1 assembly and handling precautions (1) the module should be assembled into the system fi rmly by using every mounting hole. be careful not to twist or bend the module. (2) while assembling or installing modules, it can only be in the clean area. the dust and oil may cause electrical short or damage the polarizer. (3) use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and assembly process. (4) do not press or scratch the surface harder than a hb pencil lead on the panel because the polarizer is very soft and easily scratched. (5) if the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. do not use ketone type materials (ex. acetone), ethyl alcohol, toluene, ethyl acid or methyl chloride. it might permanently damage the polarizer due to chemical reaction. (6) wipe off water droplets or oil immediately. staining and discoloration may occur if they left on panel for a long time. (7) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. in case of contacting with hands, legs or clothes , it must be washed away thoroughly with soap. (8) protect the module from static electricity, it may cause damage to the c-mos gate array ic. (9) do not disassemble the module. (10) do not pull or fold the lamp wire. (11) pins of i/f connector should not be touched directly with bare hands. (12) to avoid wireless noise interference, please ke ep the antenna away from lcd control board. 8.2 safety precautions (1) high temperature or humidity may reduce the perfo rmance of module. please store lcd module within the specified storage conditions. (2) it is dangerous that moisture come into or co ntacted the lcd module, because the moisture may damage lcd module when it is operating. (3) it may reduce the display quality if the ambient te mperature is lower than 10 oc. for example, the response time will become slowly, and the starting voltage of lamp will be higher than the room temperature. 8.3 operation precautions (1) do not pull the i/f connector in or out while the module is operating. (2) always follow the correct power on/off sequence w hen lcd module is connecting and operating. this can prevent the cmos lsi chips from damage during latch-up. (3) the startup voltage of backlight is approximatel y 1000 volts. it may cause electrical shock while assembling with inverter. do not disassemble the mo dule or insert anything into the backlight unit. www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 24 / 28 version 2.0 9 packaging 9.1 carton figure. 9-1 packing method www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 25 / 28 version 2.0 9.2 pallet figure. 9-2 packing method www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 26 / 28 version 2.0 10 definition of labels 10.1 cmo module label the barcode nameplate is pasted on each module as illustrati on, and its definitions are as following explanation. (a) model name: n141c3 - l07 (b) revision: rev. xx, for example: a1, ?, c1, c2 ?etc. (c) serial id: x x x x x x x y m d x n n n n (d) production location: made in xxxx. xxxx stands for production location. (e) ul/cb logo: ?leoo? especially stands for pan el manufactured by cmo ningbo satisfying ul/cb requirement. ?leoo? is the cmo?s ul factory code for ningbo factory. serial id includes the information as below: (a) manufactured date: year: 1~9, for 2001~2009 month: 1~9, a~c, for jan. ~ dec. day: 1~9, a~y, for 1 st to 31 st , exclude i , o and u (b) revision code: cover all the change (c) serial no.: manufacturing sequence of product ct label bar code definition: (a) c: consistent display module code (b) aaaa: consistent assembly code for this cmo model (c) 00: revision code, begin from ?01? and so on when version updated (d) dd: production location code, vr stands for cmo tainan, k5 stands for cmo ningbo (e) ww: production week (f) xxx: serial numbers year, month, date cmo internal use revision serial no. cmo internal use cmo internal use www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: jul. 15, 2008 model no.: n141c3 - l07 approval 27 / 28 version 2.0 10.2 cmo carton label (a) production location: made in xxxx. xxxx stands for production location. www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of N141C3-L07

	To Download N141C3-L07 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .